View FL7730_8981917.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to learn more about on semiconductor, please visit our website at www.onsemi.com please note: as part of the fairchild semiconductor integration, some of the fairchild orderable part numbers will need to change in order to meet on semiconductors system requirements. since the on semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the fairchild part numbers will be changed to a dash (-). this document may contain device numbers with an underscore (_). please check the on semiconductor website to verify the updated device numbers. the most current and up-to-date ordering information can be found at www.onsemi.com . please email any questions regarding the system integration to fairchild_questions@onsemi.com . is now part of on semiconductor and the on semiconductor logo are trademarks of semico nductor components industries, llc dba on semiconductor or its subsid iaries in the united states and/or other countries. on semiconductor ow ns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellec tual property. a listing of on semiconductor?s product/patent cover age may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does on semico nductor assume any liability arising out of the application or use of any product or circuit, and speci?ca lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. buyer is responsible for i ts products and applications using on semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by on semiconductor. ?typica l? parameters which may be provided in on semiconductor data sheets and/or speci?cations can and do vary in diffe rent applications and actual performance may vary over time. all operat ing parameters, including ?typicals? must be validated for each custo mer application by customer?s technical experts. on semiconductor does not convey any license und er its patent rights nor the rights of others. on semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any fda class 3 medical devices or medical devices with a same or similar classi?ca tion in a foreign jurisdiction or any devices intended for implantation i n the human body. should buyer purchase or use on semiconductor products fo r any such unintended or unauthorized application, buyer shall indemnify and hold on semico nductor and its of?cers, employees, subsidiaries, af?liates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at on semiconductor was negligent regarding the design or manufacture o f the part. on semiconductor is an equal opportunity/af?rmative action employer. this literatu re is subject to all applicable copyright laws and is not for resale in any manne r.
october 2012 ? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving FL7730 single-stage primary-side-regulation pwm controller for pfc and led dimmable driving features ? compatible with traditional triac control (no need to change existing lamp infrastructure: wall switch & wire) ? compatible with non-dimming lamp designs ? cost-effective solution without input bulk capacitor and feedback circuitry ? power factor correction (pfc) ? accurate constant-current (cc) control, independent online volta ge, output voltage, magnetizing inductance variation ? line voltage compensation for cc control ? linear frequency control for better efficiency and simple design ? open-led protection ? short-led protection ? cycle-by-cycle current limiting ? over-temperature protection with auto restart ? low startup current: 20 a ? low operating current: 5 ma ? sop-8 package available ? application voltage range: 80 v ac ~ 308 v ac applications ? led lighting system description this highly integrated pwm controller, FL7730, provides several features to enhance the performance of single- stage flyback converters. the proprietary topology, truecurrent ? enables the simplified circuit design for led lighting applications. triac dimming is smoothly managed by dimming brightness control without flicker. by using single-stage topology with primary-side regulation, an led lighting board can be implemented with few external components and minimized cost. it does not require an input bulk capacitor or feedback circuitry. to implement good power factor and low total harmonic distortion, constant on-time control is utilized with an external capacitor connected to the comi pin. precise constant-current control regulates accurate output current versus changes in input voltage and output voltage. the operating frequency is proportionally changed by the output voltage to guarantee discontinuous conduction mode (dcm) operation with higher efficiency and simpler design. the FL7730 provides protections such as open-led, short-led, and over-temperature protections. current-limit level is automatically reduced to minimize output current and protect external components in a short-led condition. the FL7730 controller is available in an 8-pin small outline package (sop). related resources evaluation board: febFL7730_l20l008a evaluation board: febFL7730_l20h008a ordering information part number operating temperature range package packing method FL7730my_f116 -40c to +125c 8-lead, small outline package (sop-8) tape & reel
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 2 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving application diagram figure 1. typical application internal block diagram figure 2. functional block diagram
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 3 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving marking information figure 3. top mark pin configuration figure 4. pin configuration pin definitions pin # name description 1 cs current sense . this pin connects a current-sense resist or to detect the mosfet current for the output-current regulation in constant current regulation. 2 gate pwm signal output . this pin uses the internal totem-p ole output driver to drive the power mosfet. 3 gnd ground 4 vdd power supply . ic operating current and mosfet driving current are supplied using this pin. 5 dim dimming . this pin controls the dimming operation of led lighting. 6 vs voltage sense . this pin detects the output voltage information and discharge time for linear frequency control and constant-current regulation. this pin connects divider resistors from the auxiliary winding. 7 comi constant current loop compensation . this pin is the output of the transconductance error amplifier. 8 gnd ground f : fairchild logo z: plant code x: 1-digit year code y: 1-digit week code tt: 2-digit die run code t: package type (m=sop) p: z: pb free, y: green package m: manufacture flow code
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 4 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving absolute maximum ratings stresses exceeding the absolute maximum ratings may dam age the device. the device may not function or be operable above the recommended operating conditions and stressi ng the parts to these levels is not recommended. in addition, extended exposure to stresses above the recomm ended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. symbol parameter min. max. unit v vdd dc supply voltage (1,22) 30 v v vs vs pin input voltage -0.3 7.0 v v cs cs pin input voltage -0.3 7.0 v v dim dim pin input voltage -0.3 7.0 v v comi comi pin input voltage -0.3 7.0 v v gate gate pin input voltage -0.3 30.0 v p d power dissipation (t a 50c) 633 mw ja thermal resistance (junction to air) 158 c /w jc thermal resistance (junction to case) 39 c /w t j maximum junction temperature 150 c t stg storage temperature range -55 150 c t l lead temperature (soldering, 10 seconds) 260 c notes: 1. stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. 2. all voltage values, except differential voltag es, are given with respect to the gnd pin. recommended operating conditions the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ens ure optimal performance to the datasheet specificatio ns. fairchild does not recommend exceeding them or designing to absolute maximum ratings. symbol parameter min. max. unit t a operating ambient te mperature -40 125 c
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 5 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving electrical characteristics v dd =20 v and t a =25c unless otherwise specified. symbol parameter condition min. typ. max. unit vdd section v dd-on turn-on threshold voltage 14.5 16.0 17.5 v v dd-off turn-off threshold volta ge 6.75 7.75 8.75 v i dd-op operating current maximum frequency, c load = 1 nf 3 4 5 ma i dd-st startup current v dd = v dd-on C 0.16 v 2 20 a v ovp v dd over-voltage-protection 22.0 23.5 25.0 v gate section v ol output voltage low v dd =20 v,i gate =-1 ma 1.5 v v oh output voltage high v dd =10 v,i gate =+1 ma 5 v i source peak sourcing current v dd = 10 ~ 20 v 60 ma i sink peak sinking current v dd = 10 ~ 20 v 180 ma t r rising time c load = 1 nf 100 150 200 ns t f falling time c load = 1 nf 20 60 100 ns v clamp output clamp voltage 12 15 18 v oscillator section f max-cc maximum frequency in cc 60 65 70 khz f min-cc minimum frequency in cc 21.0 23.5 26.0 khz vs max-cc v s for maximum frequency in cc f = f max -2 khz 2.25 2.35 2.45 v vs min-cc v s for minimum frequency in cc f = f min +2 khz 0.55 0.85 1.15 v t on(max) maximum turn-on time 12 14 16 s current sense section v rv reference voltage 2.475 2.500 2.525 v v ccr eai voltage for constant current regulation v cs = 0.44 v 2.38 2.43 2.48 v t leb leading-edge blanking time 300 ns t min minimum on time in cc v comi = 0 v 600 ns t pd propagation delay to gate 50 100 150 ns t tdis-bnk t dis blanking time of vs 1.5 s i comi-bnk vs current for comi blanking 100 a current-error amplifier section gm transconductance 85 mho i comi-sink comi sink current v eai =3 v, v comi =5 v 28 38 a i comi-source comi source current v eai =2 v, v comi =0 v 28 38 a v comi-hgh comi high voltage v eai =2 v 4.9 v v comi-low comi low voltage v eai =3 v 0.1 v continued on the following page?
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 6 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving electrical characteristics v dd =15 v and t a =25c unless otherwise specified. symbol parameter condition min. typ. max. unit over-current protection section v ocp v cs threshold voltage for ocp 0.60 0.67 0.74 v v lowocp v cs threshold voltage for low ocp 0.13 0.18 0.23 v t startup startup time 13 ms v lowocp-en vs threshold voltage to enable low ocp level 0.40 v v lowocp-dis vs threshold voltage to disable low ocp level 0.60 v over-temperature protection section t otp threshold temperature for otp (3) 140 150 160 o c t otp-hys restart junction temperature hysteresis 10 o c dimming section v dim-low maximum v dim at low dimming angle range 2.45 2.50 2.55 v v dim-high maximum v dim at high dimming angle range 3.43 3.50 3.57 v ds low v dim vs. v cs,offset slope at low dimming angle range 0.19 v/v ds high v dim vs. v cs,offset slope at high dimming angle range 0.58 v/v note: 3. if over-temperature protection is activated, the power system enters auto recovery mode and output is disabled. device operation above the maximum junc tion temperature is not guaranteed.
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 7 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving typical performance characteristics 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c figure 5. v dd-on vs. temperature figure 6. v dd-off vs. temperature 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c figure 7. i dd-op vs. temperature figure 8. v ovp vs. temperature 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c figure 9. f max-cc vs. temperature figure 10. f min-cc vs. temperature
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 8 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving typical performance characteristics 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c figure 11. v rv vs. temperature figure 12. v ccr vs. temperature 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c figure 13. v ocp vs. temperature figure 14. v ocp-low vs. temperature 0.0 0.5 1.0 1.5 2.0 2.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c 0.5 0.7 0.9 1.1 1.3 1.5 -40 -30 -15 0 25 50 75 85 100 125 temp [c] normalized to 25 c figure 15. ds low vs. temperature figure 16. ds high vs. temperature
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 9 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving functional description FL7730 is ac-dc dimmable pwm controller for led lighting applications. truecurrent ? technique and internal line compensation regulates accurate led current independent of inpu t voltage, output voltage, and magnetizing inductance variations. the triac dim function block provides smooth brightness dimming control compatible with a conventional triac dimmer. the linear frequency control in the oscillator reduces conduction loss and maintains dcm operation in a wide range of output voltages, which implements high power factor correction in a singl e-stage flyback topology. a variety of protections; such as short-led protection, open-led protection, over-temperature protection, and cycle-by-cycle current limit ation; stabilize system operation and protect external components. startup powering at startup is slow due to the low feedback loop bandwidth in the pfc converter. to boost power during startup, an internal oscill ator counts 12 ms to define startup mode. during startup mode, turn-on time is determined by current mode control with a 0.2 v cs voltage limit and transconductance becomes 14 times larger, as shown in figure 17. after startup mode, turn- on time is controlled by voltage mode using the comi voltage and the error amplifier transconductance is reduced to 85 mho. figure 17. startup sequence constant-current regulation the output current is esti mated using the peak drain current and inductor current discharge time because output current is same as the average of the diode current in steady state. t he peak value of the drain current is determined by the cs pin. the inductor discharge time (t dis ) is sensed by a t dis detector. using three sources of information (peak drain current, inductor discharging time, and operating switching period), a truecurrent ? block calculates estimated output current. the output of the calculation is compared with an internal precise reference to generate an error voltage (v comi ), which determines turn-on time in voltage mode control. with fairchilds innovative truecurrent ? technique, constant current output can be precisely controlled. pfc and thd in a conventional boost converter, boundary conduction mode (bcm) is generally used to keep input current in phase with input voltage for power factor (pf) and total harmonic distortion (thd). however, in flyback / buck boost topology, constant turn-on time and constant frequency in discontinuous conduction mode (dcm) can implement high pf and low thd, as shown in figure 18. constant turn-on time is maintained by an internal error amplifier and a large external capacitor (typically >1 f) at the comi pin. constant frequency and dcm operation are managed by linear frequency control. figure 18. input current and switching linear frequency control dcm should be guaranteed for high power factor in flyback topology. to maintain dcm in the wide range of output voltage, frequency is li nearly adjusted by output voltage in linear frequency c ontrol. output voltage is detected by auxiliary winding and resistive divider connected to the vs pin, as shown in figure 19. figure 19. linear frequency control
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 10 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving when output voltage decreases, secondary diode conduction time is increased and the linear frequency control lengthens switching period, which retains dcm operation in the wide output voltage range, as shown in figure 20. the frequency control lowers primary rms current for better power efficien cy in full-load condition. l m n v o d i s t l m v o 4 3 n d i s t 3 4 l m v o 5 3 n d i s t 3 5 t t 3 4 t 3 5 figure 20. primary and secondary current bcm control the end of secondary diode conduction time can be over a switching period set by linear frequency control. in this case, FL7730 doesnt allow ccm and operation mode changes from dcm to bcm. therefore, magnetizing inductance can be largely designed to add bcm for better efficiency if pf and thd meet specification with enough margin. dimming control triac dimmable control is implemented by simple and noise-immune external passive components and an internal dimming function block. figure 21 shows dimming angle detection and the internal dimming control block. dimming angle is sensed by zener diode and zener diode voltage is divided by two resistors (r d1 and r d2 ) to fit the sensing rang e of the dim pin. the detected signal is f iltered by capacitor c d to provide dc voltage into the dim pin. the internal dimming control adds cs offset to the peak current value as the input of truecurrent ? calculation block. when the dimming angle is small, lowered dim voltage increases cs offset , which makes calculated output current larger and reduces turn-on time to dim the led brightness. figure 21. dimming control schematic to disable the dimming function, a 1 nf filter capacitor can be added at the dim pin. an internal current source (~7.5 a) on the dim pin charges the filter capacitor up to 4 v. FL7730 goes into ic test mode when dim voltage is over 6 v; so t he maximum dim voltage should be limited to less than 5 v. short-led protection in a short-led condition, the switching mosfet and secondary diode are usually stressed by the high powering current. however, FL7730 changes the ocp level in a short-led condition. when v s is lower than 0.4 v, the ocp level becomes down to 0.2 v from 0.7 v, as shown in figure 22, so that powering is limited and external components current stress is relieved. figure 22. internal ocp block figure 23 shows operational waveforms in short-led condition. output voltage is quickly lowered to 0 v after the led-short event. the reflected auxiliary voltage is also 0 v, making v s less than 0.4 v. the 0.2 v ocp level limits primary-side current and v dd hiccups up and down in between uvlo hysteresis. figure 23. waveforms in short-led condition
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 11 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving open-led protection FL7730 protects external components, such as diodes and capacitors on the secondary side, in the open-led condition. during switch-off, the v dd capacitor is charged up to the auxiliary winding voltage, which is applied as the reflected output voltage. because the v dd voltage has output voltage information, the internal voltage comparator on the vdd pin can trigger output over-voltage protection (ovp), as shown in figure 24. when at least one led is ope n-circuited, output load impedance becomes very high and output capacitor is quickly charged up to v ovp x ns / na. then switching is shut down and v dd block goes into hiccup mode until the open-led condition is remo ved, shown in figure 25. figure 24. internal ovp block v dd_ovp v dd_on v dd_off v dd v out v dd_ovp x ns/na led open ! gate figure 25. waveforms in open-led condition under-voltage lockout (uvlo) the turn-on and turn-off thresholds are fixed internally at 16 v and 7.5 v, respectively . during startup, the v dd capacitor must be charged to 16 v through the startup resistor to enable the FL7730. the v dd capacitor continues to supply v dd until power can be delivered from the auxiliary winding of the main transformer. v dd must not drop below 7.5 v dur ing this startup process. this uvlo hysteresis window ensures that the v dd capacitor is adequate to supply v dd during startup. over-temperature protection (otp) the built-in temperature-sensing circuit shuts down pwm output if the junction temperature exceeds 150c. while pwm output is shut down, the v dd voltage gradually drops to the uv lo voltage. some of the internal circuits are shut down and v dd gradually starts increasing again. when v dd reaches 16 v, all the internal circuits start operating. if the junction temperature is still high er than 140c, the pwm controller shuts down immediately.
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 12 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving physical dimensions figure 26. 8-lead , soic, jedec ms-012, .150" narrow body package drawings are provided as a service to customers consi dering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawi ng and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and conditions, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packagi ng area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. 8 0 see detail a notes: unless otherwise specified a) this package conforms to jedec ms-012, variation aa, issue c, b) all dimensions are in millimeters. c) dimensions do not include mold flash or burrs. d) landpattern standard: soic127p600x175- e) drawing filename: m08arev13 land pattern recommendation seating plane 0.10 c c gage plane x 45 detail a scale: 2:1 pin one indicator 4 8 1 c m b a 0.25 b 5 a 5.60 0.65 1.75 1.27 6.20 5.80 3.81 4.00 3.80 5.00 4.80 (0.33) 1.27 0.510.33 0.250.10 1.75 max 0.25 0.19 0.36 0.50 0.25 r0.10 r0.10 0.90 0.406 (1.04) option a - bevel edge option b - no bevel edge
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FL7730 rev. 1.0.8 13 FL7730 ? single-stage primary-si de-regulation pwm controller fo r pfc and led dimmable driving
www. onsemi.com 1 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. typical parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including typic als must be validated for each customer application by customers technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 www.onsemi.com literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your localsales representative ? semiconductor components industries, llc

▲Up To Search▲

Price & Availability of FL7730

	To Download FL7730 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .